 |
 |
| General specifications |
 |
| Installation conditions |
Outdoor, upright use only |
 |
| Supply voltage |
DC24V |
 |
| Current |
During operation: 2.0A or lower, When stopped:
Approx.0.8A |
 |
| Ambient temperature |
-15 to +45 |
 |
| Humidity range |
35 to 90%(Relative humidity) |
 |
| Waterproofness |
IP-65 compliant |
 |
| Wind damage resistance |
Up to 20m/s: Normal operation
Up to 40m/s: Able to operate (Manual operation)
Over 60m/s: Nondestruction |
 |
| Control method |
RS485 |
 |
| Preset position |
255 positions |
 |
| Wiper |
Under 2 seconds in one cycle |
 |
| Defroster |
Front glass with defrost function,
ON/OFF |
 |
| Infrared lamp |
Effective distance 30m |
 |
| Net weight |
Approx. 5.4kg |
 |
 |
| Camera functions |
 |
| Signal system |
PAL |
 |
| Camera device |
1/4 Inch CCD |
 |
| Resolution |
Over 480 TV lines(horizontal)(during standard
sensitivity) |
 |
| S/N ratio |
Over 50dB |
 |
| Minimum illumination |
Standard color mode: 3.0Lux (F1.6 wide)
Standard B/W mode: 0.3Lux (IR cut filter Off)
Color electronic boosting: 0.1Lux (32X)
B/W electronic boosting: 0.012Lux (32X) |
 |
| Electronic shutter |
1/60-1/30,000 sec. |
 |
| Electronic boosted sensitivity |
2-32 FLD |
 |
| Wide dynamic range |
ON/OFF |
 |
| Synchronous method |
Internal |
 |
 |
| Lens functions |
 |
| Zoom ratio |
Optical 23X, Digital 10X (MAX. 230X) |
 |
| Focal length |
f=3.6 - 82.8mm |
 |
| Aperture ratio |
F1.6(Wide) - F3.7(Optical tele) |
 |
| Angle of view |
Horizontal 54.0(Widest angle) - 2.5(Tele angle)
Vertical 40.5(Widest angle) - 1.8(Tele angle) |
 |
| Minimum object distance |
100mm(Wide) - 1000mm(Tele) |
 |
| Aperture range |
F1:1.6 - F1:34 |
 |
 |
| Pan/tilt functions |
 |
| Turing angle |
angle Horizontal 360 - endless
Vertical +30K(Up) to -90K(Down) |
 |
| Speed |
Speed Horizontal: Manual 0.2K/s (Tele) to 60K/s
(Wide)
Preset max 90K/s
Auto pan approx.3K to 9K/s
Vertical: manual 0.2K/s (Tele) to 30K/s (Wide)
Preset max 30K/s
Position repeatability: Horizontal less than 0.3K
Vertical less than 0.3K |
 |
| Initial action |
When the power is plugged in, the pan tilt camera
starts initialization and stops at the preset position No, 1. |
 |
| Auto pan |
Rotates between 2 preset positions |
 |
| Auto switching action |
Shifts to the preset positions in
order |