@
Main features

Network camera server equipped inside.

10Base-T interface equipped.

Hardware JPEG compression engine equipped.

Store 800pcs pictures maximum.

Variable trigger functions (motion detection, digital input, determined cycle, determined time, requests from www browser).

Save pictures before and after trigger, to watch the event.
Other features are the same with PTC-103HU.
System construction
Specifications
SYSTEM
@ Pan/tilt camera PTC-103HU-23N 1 @
@ Connection cable @ 1 @
@ Interface box PTC-103IFB-201P1 1 @
GENERAL SPECIFICATIONS
Installation conditions Outdoor, upright use only
Supply voltage DC24V
Current During operation: 2.0A or lower,
When stopped: Approx.0.8A
Ambient temperature -15 to +45Ž
Humidity range

35 to 90% (relative humidity)

Waterproof level IP-65 compliant
Wind damage resistance Up to 20M/s: normal operation
Up to 40M/s: Operation possible (manual operation)
Up to 60M/s: Camera could suffer damage
Control method RS485
Preset position 255 positions
Wiper Under 2 seconds in one cycle
Defroster Front glass with defrost function, ON/OFF
Infrared lamp Effective distance: 30M
Net weight Approx. 5.4KG
Camera functions
Signal system NTSC
Camera device 1/4 inch CCD
Resolution Over 480 TV lines (horizontal) (during standard sensitivity)
S/N ratio

Over 50dB
Minimum illumination Standard color mode: 3.0Lux (F1.6 wide)
Standard B/W mode: 0.3Lux (IR cut filter Off)
Color electronic boosting: 0.1Lux (32X)
B/W electronic boosting: 0.012Lux (32X)
Electronic shutter 1/60 - /30,000 sec.
Electronic boosted sensitivity 2 - 32 FLD
Wide dynamic range ON/OFF
Synchronous method Internal
Lens functions
Zoom ratio Optical 23X, Digital 10X (MAX. 230X)
Focal length f=3.6 - 82.8mm
Aperture ratio F1.6(Wide) - F3.7(Optical tele)
Angle of view Horizontal 54.0K(Widest angle) - 2.5K(Tele angle)
Vertical 40.5K(Widest angle) - 1.8K(Tele angle)
Minimum object distance 100mm(Wide) - 1000mm(Tele)
Aperture range F1:1.6 - F1:34
Pan/tilt functions
Turing angle Horizontal 360Kendless
Vertical +30K(Up) to -90K(Down)
Speed Horizontal: Manual 0.2K/s (Tele) to 60K/s (Wide)
Preset max 90K/s
Auto pan approx.3Kto 9K/s
Vertical: manual 0.2K/s (Tele) to 30K/s (Wide)
Preset max 30K/s
Position repeatability: Horizontal less than 0.3K
Vertical less than 0.3K
Initial action When the power is plugged in, the pan tilt camera starts initialization and stops at the preset position No, 1.
Auto pan Rotates between 2 preset positions
Auto switching action Shifts to the preset positions in order
Interface box
PTC-103IFB-2048M
Power supply AC85V - 264V 50/60Hz
Control method RS-485
Communication connector 10 Base-T
Digital import export Import 2, export 2
SOFTWARE
SPECIFICATIONS
Ring buffer (2systems) Set up of pixel, compression ratio, interval for collecting picture, pixel before and after trigger time. Memorizing JPEG compression picture according to settled conditions.
Storage buffer Set trigger time, to store or record ring buffer picture.
Trigger condition Digital import, certain cycle (certain time), motion detection, request from WWW browser.
Max. collection speed 800pcs pictures (320x240pixels, low level)
Digital import export Trigger import and surveillance command
SNMP agent Available for SNMPv1, support MIB(CEC-MIB), and internet standard MIB(RFC1213MIB-2 Except EGP), access limit from community, sending e-mails to SNMP trap from trigger, Max. 4 mail addresses.
HTTP Server Set up, showing picture, sending continue pictures (Max.30pcs) according to Server Push function, available for normal network such as Netscape Navigator / Internet Explorer. Make own screen from web customize function.
FTP Server Get picture data or Logging data
Return to top
   
@